-Download usb samsung driver if not already installed on your pc (when I flashing galaxy young, I did not install this usb driver because it was already installed) http://cogismith.com/2LWa
2. Extract all the files that have been downloaded.
3. Install the drivers that have been extracted on your pc
4. Prepare your phone, turn it off
5. Go to download mode, by pressing Home + Power + Volume down simultaneously.
6. Press Volume Up to continue. It looks like the picture below
7. Open odin, usually odin detected as a virus so just turn off your antivirus
8. Connect your phone to your pc via cable data.
9. Enter the firmware you have downloaded and extract it. Fill it into place. CSC file in CSC box, MODEM file in PHONE box, and PDA file on PDA box. Other not required
10. Check Auto Reboot and F. Reset Time as shown above
11. When all is ready, click Start and wait until the process is complete. Then there will be green PASS writing.
Flashing Preparation
1. Extract ODIN already downloaded using Winrar Application.
2. Extract then Install Driver that has been downloaded, Restart your computer to the driver that just in Install can directly recog with windows OS.
3. Extract Firmware, make sure the extension is .tar / .md5
4. Turn off Android until completely off (unplug the battery), Restart your Android in download mode, do I press the Volume Down + Home + Power button simultaneously until exit 'Warning!'
How to Flashing
1. Open the downloaded ODIN Application on the flashing material step, Run in Run as Administrator mode. Right-click on the Application and Run As Administrator
2. Connect Android already in Mode download (ODIN mode) to Computer [Ensure] odin can detect HP you just connect to Computer, if Hp detected then there is read COM: on ODIN application, vice versa if after android connected but there is no Reactions / devices read in ODIN please reinstall the drivers.
3. In the application odin please select the menu AP / PDA then will come out new window, all you have to do is choose file firmware
G313HZDBS0API2_G313HZOLB0AOD1_G313HZDXU0AOD1_HOME.tar we previously extracted. If you have met please click Open
4. Do not touch the Repartition menu option
5. Click start to start Flashing Process -> Wait for some time usually this process will take up to 5 minutes
6. When the Flashing process is complete it will display a green PASS writing on ODIN Applications. This indicates that the process of Flashing Galaxy V SM-G313HZ is complete and and SUCCESS 100%. Samsung Galaxy V. Device will restart by itself
Note:
- When the android is finished in flash and when in turn on more than 20 minutes hang in samsung logo, please do factory reset on recovery mode menu, do wipe data and wipe cache.
- If the flashing process fails there is a possibility of damage caused by IC eMMC please read: The characteristic of EMMC is broken
That's the stage How to Flashing Samsung Galaxy V SM-G313HZ by using ODIN. If the problem you are facing.
